Questions on Ordering

Our customer service representatives are available to assist you with the ordering process, so do not hesitate to give us a call 1-800-567-6592.  You may start the process by downloading our Quote Request Form or Credit Application.

Important Notes

  • Decking is not made for concentrated, point load or line loads unless specified
  • Capacity ratings are to ANSI MH 26.2 for static loads
  • ITC is not responsible for decking ordered incorrectly
ITC-Patch

How To Measure

Stock Sizes

img-measure_1

36 x 46 – 3   |   42 x 52 – 3   |   44 x 52 – 3
36 x 52 – 3   |   42 x 58 – 3   |   48 x 46 – 3
42 x 46 – 3   |   44 x 46 – 3   |   48 x 52 – 3

Standard decks are available in 2.5 x 4 grid and 5g wire. All available for step beams. 42 x 46 in both step and flared.

Width Considerations

96″   beams = order (2) 46″ wide decks
102″ beams = order (2) 48″ wide decks
108″ beams = order (2) 52″ wide decks
120″ beams = order (2) 58″ wide decks
132″ beams = order (3) 44″ wide decks
144″ beams = order (3) 46″ wide decks

Depth Considerations

For standard waterfall style decks, the deck’s depth measurement refers to the distance from the outside of the back beam to the outside of the front beam. The decks will be made slightly larger than this to allow for easy installation and additional support.

Important

For other size beam widths, use the following rule: For beams 120” or less, divide the width by two and subtract 2” to get deck width.

For beams over 120”, divide the width by three and subtract 2” to get deck width.

This creates a small gap between decks and on each end which allows for easy installation. Sometimes you may get by with a smaller gap in order to use standard deck sizes and save costs. For example, with a 106“ beam, two standard 52” decks could be used with a tighter fit, rather than following the formula and having two custom-sized 51” decks made.